Pump BOXER FPC 100 PTFE
Pump BOXER FPC 100 with PTFE for chemical products
-
Productivity - up to 130 l / min
-
Connection - 1 ”- DN 25
-
Execution Options: PTFE
The BOXER FPC 100 double diaphragm pump is made entirely of PTFE fluoroplastic. The pump housing is reinforced with AISI 316 stainless steel. All parts in contact with the liquid are made exclusively of PTFE, and the pump produces a flow rate of 130 l / min.
BOXER FPC 100 Мембранний насос Розмір: 554 Kб |
Key features:
-
Maximum pump capacity up to 130 l / min
-
Work in unrestricted mode
-
Pumping liquids containing solid and insoluble particles
-
Pumping of viscous liquids
-
Dry Run Support
-
Suitable for continuous use
-
The pump is made of a solid piece of PTFE
Performance chart
This figure shows the dependence of the head and pump capacity on the pressure and air flow of the compressor. The higher the compressed air pressure, the greater the head and the higher the performance curve, in turn, the speed of pumping liquid is regulated by changing the air flow rate.
For example, at a pressure of 7 bar, the optimal operating mode will be pumping 100 l / min with a pressure of 28 meters, and the air flow rate will be 1400 nL / min.
Technical data of pneumatic pumps BOXER FPC 100
Entrance and exit openings | G 1" - DN 25 |
Air inlet | G 3/8" f |
Self-priming fluid in the dry state | 4 m |
Maximum cost | 130 l/min |
Max head | 80 m |
Max. air supply pressure | 8 bar |
The maximum diameter of solids | 4 mm |
Material of execution | PTFE |
Max. temperature | 95 °C |
Weight | 22 kg |
Video