CUBIC 15 Pneumatic Double Diaphragm Pumps

Equipment › CUBIC - Pneumatic Pumps › CUBIC 15 Pneumatic Double Diaphragm Pumps

CUBIC 15 Double Diaphragm Pumps

• Pump capacity up to 17 l/min
• Suction / delivery connections: G 3/8” f
• Constructing materials: PP – ECTFE

CUBIC 15 Pneumatic Double Diaphragm Pumps INSTRUCTIONS FOR USE AND MAINTENANCE
	ATEX ZONE 2 - STANDARD ON ALL MODELS II 3G Ex h IIB T4 Gc II 3D Ex h IIIB T135°C Dc	ATEX ZONE 1 - ON REQUEST II 2G Ex h lib T4 Gb II 2D Ex h IIIB T135°C Db

Main Characteristics of CUBIC 15

• capacity is up to 17 l/min; self-priming is 3 m; operation without discharge head
• pumping liquids with solid and insoluble particles with dimensions up to 0.5 mm
• pumping liquids with very high viscosity
• smooth adjustment 0-100% by adjusting the air flow
• dry run is possible
• functions of drum transfer pumps
• fire safety design for pumps without electric drive
• standard version - ATEX Certification II 3/3G D IIB T 135°C (zone 2)
• can be applied in explosive environment, ATEX Certification II 2/2GD with IIB T 135°C (zone 1)
• full immersion into pumped medium (available upon request)
• compact dimensions, easy maintenance

Performance Graph

This figure shows the dependence of the head and pump capacity on the pressure and air flow of the compressor. The higher the compressed air pressure, the greater the head and the higher the performance curve, in turn, the speed of pumping liquid is regulated by changing the air flow rate.

For example, at a pressure of 5 bar, the optimal operating mode will be pumping 8 l / min with a head of 23 meters, the air consumption will be 105 nL / min

Technical Data

Dimensions (mm)

Video

Articles:

• ICU15P-NTTPV-- CUBIC 15 pump of PP polypropylene, o-ring FPM (Viton)
• ICU15P-NTTPD-- CUBIC 15 pump of PP polypropylene, o-ring EPDM
• ICU15EC-NTTECV-- CUBIC 15 pump of PVDF polyvinylidene fluoride, o-ring FPM (Viton)
• ICU15EC-NTTECD-- CUBIC 15 pump of PVDF polyvinylidene fluoride, o-ring EPDM