BOXER 15 Diaphragm Pump

Equipment › BOXER - Air Operated Diaphragm Pumps › BOXER 15 Diaphragm Pump

BOXER 15 Diaphragm Pneumatic Pump

• Capacity up to 17 l/min
• Connections 3/8”
• Available in PP - PVDF - ALU - AISI 316

BOXER 15 Diaphragm Pump INSTRUCTIONS FOR USE AND MAINTENANCE

The BOXER 15 diaphragm pump has a casing made of PP polypropylene, PVDF polyvinylidene fluoride, ALU aluminum or AISI 316 stainless steel. The BOXER 15 diaphragm pump can be used in harsh industrial conditions, in hazardous areas, for pumping liquids of various viscosities.

The pump capacity reaches 17 l / min, the maximum height of the liquid column in self-priming mode is 3 meters. They work stably even in the presence of insoluble solids in the working substance. The performance of the equipment is adjustable by the user in the range from 0 to 100% without pressure loss. This pump is powered by a compressor, pneumatic line

MAIN FEATURES:

• Pump capacity up to 17 l/min
• Self-priming up to 9 m
• Free flow mode is available
• Pumping liquids with solids and insoluble particles
• Pumping liquids with high viscosity
• Dry running is available
• Double inlet and outlet manifold is available
• Functioning as drum transfer pump
• Fire safety pump design, no electric drive
• Full immersion into pumped medium
• Easy maintenance and parts replacement
• STANDARD: II 3/3 GD c IIB T135°C (zone 2)
• CONDUCT: II 2/2 GD c IIB T135°C (zone 1)

PERFORMANCE DIAGRAM

This figure shows the dependence of the head and pump capacity on the pressure and air flow of the compressor. The higher the compressed air pressure, the greater the head and the higher the performance curve, in turn, the speed of pumping liquid is regulated by changing the air flow rate.

For example, at a pressure of 7 bar, the optimal operating mode will be pumping 6 l / min with a head of 45 meters, and the air flow will be 120 nL / min

TECHNICAL DATA

Video