FULLFLOW 502 Diaphragm Pump
FULLFLOW 502 diaphragm pump for pumping large suspended solids with a diameter of up to 45 mm
- Productivity - up to 530 l/min
- Connections - G 2″ 1/2 f - DN 65
- Execution options: PP polypropylene
FULLFLOW 502 Diaphragm Pump Size: 304 Kb |
Key features:
- Maximum pump capacity up to 530 l / min
- Work in non-pressure mode
- Pumping liquids containing solid and insoluble particles
- Maximum suspended solids diameter 45 mm
- Maximum particle length 600 mm
- Dry Run Support
- Suitable for permanent use.
- The pump is made of PP polypropylene
Performance graph
This figure shows the dependence of the head and pump capacity on the pressure and air flow of the compressor. The higher the compressed air pressure, the greater the head and the higher the performance curve, in turn, the speed of pumping liquid is regulated by changing the air flow rate.
For example, at a pressure of 4 bar, the optimal operating mode will be pumping 400 l/min with a head of 8 meters, and the air flow will be 2700 nL/min.
Technical data for FULLFLOW 502 diaphragm pumps
Entrance and exit openings | G 2″ 1/2 f - DN 65 |
Air inlet | G 1/2″ f |
Dry suction power | 3,5 m |
Maximum flow | 530 l/min |
Maximum head | 40 m |
Max. air supply pressure | 4 bar |
Max. particle diameter | 45 mm |
Material of execution | PP |
Max. temperature | 65 °C |
The weight | 38 kg |